wire shelf Vendor.Concepts related to medium-sized shelves

　　Medium sized shelves, belonging to a type of storage shelves, are shelf shelves. It is distinguished and named according to the carrying capacity of the shelves. According to this classification principle, medium-sized shelves fall between light and heavy shelves, hence the name medium-sized shelves. The standard type of medium-sized shelves has a beautiful appearance, a wide range of applications, easy installation and disassembly, and can be adjusted freely. It can bear loads ranging from 100 kg to 500 kg per layer; Non standard large-span and large load-bearing capacity, with a novel and adjustable appearance, capable of carrying between 500 kg and 5000 kg per layer.

　　1. The fully assembled structure allows for easy and flexible assembly and disassembly.

　　2. The column is an assembled structure, and the crossbeam is connected to the column by steel buckle and locking with a safety key to prevent detachment.

　　3. Optimization of shelf material cross-section, selection of multiple pipes to improve load-bearing capacity.

　　4. The column is equipped with adjustable hole spacing every 60mm, which can be adjusted according to the height of the goods.

　　5. Adjacent columns in the opposite direction can be reinforced by partition braces, and the bottom of the columns can be used in conjunction with ground nails to improve safety and reliability.

　　6. Suitable for enterprises with large storage capacity, such as ordinary hands or stackers.

　　Do you know the maintenance techniques for daily use of the workbench?

　　1. Steam disinfection is prohibited.

　　2. Regularly conduct performance checks and promptly repair any issues found.

　　3. After the workbench has been used for a period of time, with the increase of dust capacity on the filter, the air flow speed in the operation area gradually decreases. When the requirements for use cannot be met, the prefilter should be taken out, the foam plastic should be removed, washed with detergent, and then put into the frame for use after drying. If the prefilter is attached with dirty oil or damaged, it should be replaced.

　　4. To prevent leakage in the operating area of the air line that has not been filtered by the high-efficiency filter, a latex sponge pad with a width of 15mm, a thickness of 6-8mm, and a length equal to the length of the filter should be pasted on the outlet end of the high-efficiency filter.

Read recommendations:

5-Tier Industry Storage Shelf / Boltless Steel Shelving Unit

4 tier metal bookself

Shelf type shelves.how to fix a wire closet shelf